• Square Penstock
• Channel Gate
• Handstops
• Flap Valve
• Knife Gate Valve
• Gate Valve
• Butterfly Valve (F2600)
• Butterfly Valve (F2800)
• Butterfly Valve (F2210)
• Butterfly Valve (F2230)
• Swing Check Valve

• General Information
• Design Standard: BS7775, 4 sides sealing
• Testing Standard: BS7775
• Size: 200X200-3000X3000 mm
• Working Head: 6m on/off seating water head for standard design
• Max. 6m on/off seating water head for heavy design
• Installation: Wall Installation
• Operation: Pneumatic Cylinder, Electrical Actuator,
• Handwheel and Gear Box
  

• Integral Frame

Frick F9000 Series Penstock has an integral frame. We use advanced mechanical equipment to make the frame try to be made by only a few piece steel to reduce the welding, which makes the frames look more beautiful and also become more stability.

 
• Quiet

We use POM as gate guilder to ensure the penstock can be opened or closed very freely, also the gate will not touch the frame in whatever positions, which make the products service with no noise.

• Four sides seal in bi-direction

As the penstock profile seal is on-piece, and has a special hackle shape in both sides, our penstock can be well sealed in bi-direction at a max. 6m water head.

• Ideal Flow Characteristic

When opening our penstock, there're always 3 sides are sealed by the rubber, which ensures our products have very good flow characteristics, suitable as throttling and regulating penstock,

• 
  Easy Installation

F9000 Series Penstock can be wall mounted or channel mounted.
Because we use removable claws, anchor and sponge seal for installation, our products can be easily installed at inlets or outlets of pits or basins.
Our products are available for grouting in recesses of the structure

• Penstock Dimensions

* For overall dimensions of special sizes, please contact our engineer